InBody 380 Body Composition Scans
See what your weight is really made of. Pick your goal to jump to your guide.
Tap your goal to jump to the numbers that matter most for you, plus simple steps to improve them. New to InBody? Start with What is the InBody 380?
The InBody 380 is a professional body composition analyzer. In a quick, standing scan it shows what your weight is really made of — muscle, fat and water — arm by arm, leg by leg, so you can track real progress instead of guessing from the scale.
How does the InBody scan work?+
You stand on the platform and hold the hand electrodes. InBody uses bioelectrical impedance analysis (BIA): a very small electrical current passes through your body, and because muscle, fat and water conduct it differently, the device can measure your body composition.
- 8-point tactile electrodes on your hands and feet, so every test starts from the same points.
- Multiple frequencies to measure the water inside and outside your cells.
- Direct segmental measurement of each arm, each leg and your trunk.
- No empirical estimation — results come from your own measurements, not averages based on age or sex.
Why is this better than a scale or BMI?+
A scale only shows total weight, and BMI only looks at height and weight. Neither can tell muscle from fat. Two people can weigh the same and have very different health pictures. InBody shows where your weight comes from, so you know if you’re losing fat or muscle.
What will I get after my scan?+
A Gameday Results Sheet with your numbers and a Body Composition History chart that tracks your progress scan to scan. Our highly trained Gameday Solon staff walk you through it and turn it into a plan — not just a printout.
How do I prepare for my scan?+
- Keep normal fluid intake the day before.
- Scan before you exercise (or wait at least 1 hour after).
- Use the bathroom first, and don’t eat a big meal right before.
- Scan at about the same time of day each time.
- Wear light clothes; remove shoes, socks and heavy jewelry.
- Skip lotion on your hands and feet.
Is there anyone who should check with us first?+
Tell our staff before your scan if you have a pacemaker or any other implanted electronic medical device, if you are pregnant, or if you have metal or cosmetic implants. Low-carb or keto diets can also shift your numbers, so we compare you to your own first scan.
The goal isn’t just a smaller number on the scale. It’s to lose fat and keep your muscle. With newer weight-loss medicines, people can lose about 10% of their lean mass (around 13 lb) without a plan to protect it (Diabetes Care, 2024). Your InBody scan shows whether you’re losing fat or muscle, so you can fix it early.
Tap each number to see what it means. Find each one by name on your Results Sheet.
1. Muscle-Fat Analysis+
What it is: three bars — your weight, your muscle (Skeletal Muscle Mass) and your fat (Body Fat Mass).
Your goal: the fat bar gets shorter while the muscle bar stays the same or grows. Most people start with a C-shape and work toward an I-shape, then a D-shape.
Why it matters for weight loss: this shows what you’re losing. Losing fat is the win. Losing muscle is not.
2. Percent Body Fat (Obesity Analysis)+
What it is: how much of your weight is fat.
Your goal: a healthy range is 10–20% for men and 18–28% for women. Any steady drop is progress.
Why it matters for weight loss: it’s a better measure than BMI, which only looks at height and weight.
3. Visceral Fat Level+
What it is: fat stored deep in your belly, around your organs.
Your goal: below 10.
Why it matters for weight loss: high visceral fat is linked to heart disease, diabetes and high blood pressure. Lowering it is one of the biggest health wins you can get.
4. Body Fat – Fat Free Mass Control+
What it is: a box that shows how many pounds of fat to lose (minus sign) and muscle to gain (plus sign) to reach an average body fat level.
Your goal: use it as a direction, not a deadline. Our staff will help you set a closer, realistic goal first.
Why it matters for weight loss: it turns your scan into a clear target in pounds.
5. Body Composition History+
What it is: a chart at the bottom of your sheet that compares your last scans.
Your goal: body fat going down and muscle holding steady or going up.
Why it matters for weight loss: this is where you catch muscle loss early, before it slows you down.
6. Basal Metabolic Rate (BMR)+
What it is: about how many calories your body burns in a day at rest.
Your goal: keep it from dropping as you lose weight.
Why it matters for weight loss: more muscle means a higher BMR. Protecting muscle helps keep your metabolism from slowing down.
7. Segmental Lean Analysis (legs)+
What it is: how much muscle you have in each leg (plus arms and trunk).
Your goal: the bottom number for each leg at 100% or higher.
Why it matters for weight loss: your legs hold your biggest muscles. Strong legs keep you active, burning calories and steady on your feet.
- Start lifting weights right away — don’t wait until the weight is gone.
- If you’re not hungry, eat your protein first at every meal.
- Scan every 4 weeks so your provider can see whether you’re losing fat or muscle.
Easy steps to get better results+
- Lift weights 2–3 days a week and work your whole body.
- Get a little stronger over time — add a few pounds or a couple of reps when an exercise feels easy.
- Add cardio on top of lifting, not instead of it.
- Eat protein at every meal: about 0.6–0.9 g per pound of body weight daily, 20–40 g per meal (ISSN).
- Fill the rest of your plate with vegetables and fiber.
- Lose weight at a steady pace — too fast usually means losing more muscle.
- Sleep 7–9 hours.
- Trust your scan trend, not the daily scale.
How often should I scan?+
Every 4 weeks, and never less than 2 weeks apart. It takes about 5 scans to see a true trend.
What should I do on scan day?+
- Scan before you exercise. If you can’t, wait at least 1 hour after.
- Use the bathroom first, and don’t eat a big meal right before.
- Scan at about the same time of day each time.
- Wear light clothes. Take off shoes, socks and heavy jewelry.
- Tell us if you follow a low-carb or keto diet, or have any implants. They can shift your numbers, so we compare you to your own first scan.
TRT is testosterone replacement therapy; BHRT is bioidentical hormone replacement therapy. In studies of men with low testosterone, treatment added lean muscle and lowered body fat (Age, 2015). Therapy works best with strength training: your hormones open the door, and lifting walks you through it. Your InBody scan shows whether the changes are really happening.
Tap each number to see what it means. Find each one by name on your Results Sheet.
1. Muscle-Fat Analysis+
What it is: three bars — your weight, your muscle (Skeletal Muscle Mass) and your fat (Body Fat Mass).
Your goal: the muscle bar growing and moving toward a D-shape (muscle bar longer than the weight and fat bars).
Why it matters on therapy: rising muscle is the clearest sign your therapy and training are working together.
2. Percent Body Fat (Obesity Analysis)+
What it is: how much of your weight is fat.
Your goal: a healthy range is 10–20% for men and 18–28% for women, moving down over time.
Why it matters on therapy: losing fat, especially around your middle, is a main goal of treatment. Watch this, not the scale.
3. ECW/TBW+
What it is: a ratio that compares the water outside your cells to all the water in your body. Think of it as a water-retention check.
Your goal: between 0.360 and 0.390.
Why it matters on therapy: some people hold extra water on hormone therapy. If this goes above 0.390, or your weight rises but your muscle doesn’t, tell your provider.
4. Phase Angle+
What it is: a number that reflects how healthy and strong your cells are.
Your goal: usually about 5–7 for men and 4–6 for women. What matters most is your own number going up over time.
Why it matters on therapy: it helps show whether your body is responding well to treatment, training and nutrition.
5. Visceral Fat Level+
What it is: fat stored deep in your belly, around your organs.
Your goal: below 10.
Why it matters on therapy: high visceral fat is linked to heart disease, diabetes and high blood pressure — important to track alongside your labs.
6. Segmental Lean Analysis+
What it is: how much muscle you have in each arm, each leg and your trunk.
Your goal: each body part at 100% or higher, and your legs keeping up with your upper body.
Why it matters on therapy: it makes sure you’re building strength evenly.
7. Body Composition History+
What it is: a chart at the bottom of your sheet that compares your last scans.
Your goal: muscle going up and fat going down over the months.
Why it matters on therapy: changes take months. Your history shows the real trend and gives your provider facts your labs can’t.
Easy steps to get better results+
- Lift weights 3 days a week and work your whole body.
- Focus on big lifts: squats, deadlifts, presses and rows.
- Get a little stronger each week.
- Add 2–3 cardio sessions a week.
- Eat about 0.7–0.9 g of protein per pound of body weight daily, 20–40 g per meal (ISSN).
- Go easy on alcohol.
- Sleep 7–9 hours.
- Keep every lab appointment — testosterone can raise hematocrit, so regular blood work keeps treatment safe.
- Bring your Results Sheet to provider visits.
- Never change your dose on your own based on a scan. Talk with your provider first.
How often should I scan?+
Get a baseline scan before or right when you start therapy, then every 4 weeks (never less than 2 weeks apart). Try to scan close to your follow-up labs so your provider can review both together.
What should I do on scan day?+
- Scan before you exercise. If you can’t, wait at least 1 hour after.
- Use the bathroom first, and don’t eat a big meal right before.
- Scan at about the same time of day each time.
- Wear light clothes. Take off shoes, socks and heavy jewelry.
- Tell us if you follow a low-carb or keto diet, or have any implants. They can shift your numbers, so we compare you to your own first scan.
When you lift and do CrossFit, the bathroom scale can fool you. You can build muscle, lose fat and still weigh the same. Your InBody scan shows what’s really changing inside your body.
Tap each number to see what it means. Find each one by name on your Results Sheet.
1. Muscle-Fat Analysis+
What it is: three bars — your weight, your muscle (Skeletal Muscle Mass) and your fat (Body Fat Mass).
Your goal: a D-shape — the muscle bar sticks out longer than the weight and fat bars.
Why it matters for strength: it’s the best single picture of whether your training is building muscle. If you’re bulking, make sure fat isn’t growing faster than muscle.
2. Segmental Lean Analysis+
What it is: how much muscle you have in each arm, each leg and your trunk.
Your goal: each body part at 100% or higher, left and right sides close to the same, and legs keeping up with your upper body.
Why it matters for strength: a weak side can show up as a crooked squat, a dipping shoulder on a press, or a nagging injury.
3. Body Composition History+
What it is: a chart at the bottom of your sheet that compares your last scans.
Your goal: muscle going up while body fat stays the same or goes down.
Why it matters for strength: muscle grows slowly. Your history shows whether your program is working better than any single scan.
4. Percent Body Fat (Obesity Analysis)+
What it is: how much of your weight is fat.
Your goal: a healthy range is 10–20% for men and 18–28% for women. Our staff will help you set a goal range that’s right for you.
Why it matters for strength: less fat makes pull-ups, muscle-ups and bodyweight moves easier. Ignore BMI — it often labels muscular people as overweight.
5. ECW/TBW+
What it is: a ratio that compares the water outside your cells to all the water in your body. Think of it as a swelling check.
Your goal: between 0.360 and 0.390.
Why it matters for strength: above 0.390 can mean swelling or inflammation. If one limb suddenly looks “bigger” and this is high, it may be swelling from an injury, not new muscle.
6. InBody Score+
What it is: one simple grade for your body. The average is 80.
Your goal: above 80 and climbing.
Why it matters for strength: your score goes up when you add muscle or lose fat — an easy way to see progress at a glance.
Easy steps to get better results+
- Follow a strength plan, not random workouts — add weight or reps each week on main lifts.
- Fix a weak side with one-side exercises (split squats, single-arm presses and rows). Start with the weaker side.
- Don’t skip leg day — do squats, deadlifts and lunges first if legs are behind.
- Eat about 0.7–0.9 g of protein per pound of body weight daily (ISSN).
- Eat protein around your workout, 20–40 g per meal.
- Sleep 7–9 hours.
- Take an easy week every 4–6 weeks.
- Listen to swelling: if ECW/TBW climbs, back off that area and ask us about an MSK evaluation.
How often should I scan?+
Every 3 weeks, and never less than 2 weeks apart. It takes about 5 scans to see a true trend.
What should I do on scan day?+
- Scan before you exercise. If you can’t, wait at least 1 hour after.
- Use the bathroom first, and don’t eat a big meal right before.
- Scan at about the same time of day each time.
- Wear light clothes. Take off shoes, socks and heavy jewelry.
- Tell us if you follow a low-carb or keto diet, or have any implants. They can shift your numbers, so we compare you to your own first scan.
HYROX is a fitness race: run 1 km, do a workout station, and repeat 8 times — SkiErg, sled push, sled pull, burpee broad jumps, rowing, farmer’s carry, sandbag lunges and wall balls. InBody is the official body composition partner of HYROX North America.
Tap each number to see what it means. Find each one by name on your Results Sheet.
1. Segmental Lean Analysis+
What it is: how much muscle you have in each arm, each leg and your trunk.
Your goal: each body part at 100% or higher, with left and right sides close to the same.
Why it matters for HYROX: 8 km of running, lunges and wall balls are hard on your legs. If one leg is weaker, the other works harder — and that’s how injuries happen.
2. Muscle-Fat Analysis+
What it is: three bars — your weight, your muscle (Skeletal Muscle Mass) and your fat.
Your goal: a D-shape — the muscle bar longer than the weight and fat bars.
Why it matters for HYROX: muscle pushes the sled, pulls the rope and carries the weights. More muscle means more power on every station.
3. Percent Body Fat (Obesity Analysis)+
What it is: how much of your weight is fat.
Your goal: a healthy range is 10–20% for men and 18–28% for women. Our staff will help you set a goal range that’s right for you.
Why it matters for HYROX: extra fat is extra weight you carry for 8 km, plus every burpee and lunge.
4. ECW/TBW+
What it is: a ratio that compares the water outside your cells to all the water in your body. Think of it as a swelling check.
Your goal: between 0.360 and 0.390.
Why it matters for HYROX: above 0.390 can mean swelling or inflammation — often a sign you’re training hard but not recovering.
5. Visceral Fat Level+
What it is: fat stored deep in your belly, around your organs.
Your goal: below 10.
Why it matters for HYROX: it’s linked to heart disease, diabetes and high blood pressure — and the scale can’t show it. InBody and HYROX list it as a key race-training number.
6. Body Composition History+
What it is: a chart at the bottom of your sheet that compares your last scans.
Your goal: muscle going up and body fat going down over time.
Why it matters for HYROX: one scan is a snapshot. Your history shows whether your training is working.
7. Grip Strength+
What it is: how hard you can squeeze, measured with the InBody grip tool.
Your goal: a number that goes up from scan to scan.
Why it matters for HYROX: your grip often gives out before your legs do — on the sled pull, farmer’s carry, rower and SkiErg.
Easy steps to get better results+
- Lift weights 2–3 days a week — don’t skip strength days even when running a lot.
- Fix a weak side with split squats, step-ups and single-arm rows.
- Practice running tired: run 1 km right after lunges, wall balls or a sled push.
- Train your grip: hangs, heavy carries, rope or towel pulls.
- Eat about 0.6–0.9 g of protein per pound of body weight daily (ISSN).
- Don’t diet hard while training — if muscle drops, you need more food, not less.
- Drink water every day, not just before race or scan day.
- If ECW/TBW rises two scans in a row, take an easier week and sleep 7–9 hours.
- If a weak side doesn’t improve, ask us about an MSK evaluation.
How often should I scan?+
Every 3 weeks during training, and never less than 2 weeks apart. It takes about 5 scans to see a true trend.
What should I do on scan day?+
- Scan before you exercise. If you can’t, wait at least 1 hour after.
- Use the bathroom first, and don’t eat a big meal right before.
- Scan at about the same time of day each time.
- Wear light clothes. Take off shoes, socks and heavy jewelry.
- Tell us if you follow a low-carb or keto diet, or have any implants. They can shift your numbers, so we compare you to your own first scan.
Why scan at Gameday Solon?+
- Expert review: our highly trained staff are trained on the InBody and know exercise and functional fitness.
- Experienced team: 75+ years of combined medical experience.
- Always learning: continual training and collaborative clinical calls with 400+ clinics across the U.S. and Canada.
- One team: InBody scans, lab work and provider visits under one roof in Solon.
- MSK evaluation: if your scan shows a weak side or swelling, we check the muscle or joint behind it.
- Recovery options: ask about our glutathione and vitamin options.
Guides reviewed by Karin Cseak, DO, Medical Director, Gameday Men’s Health Solon. Your InBody results are for education and are not a diagnosis. Talk with a Gameday provider before changing medicines, supplements or a treatment plan. Sources: InBody USA; ISSN position stand on protein and exercise; Diabetes Care (2024); Age (2015).
No comments:
Post a Comment